Click each step to see the action. You can also click the picture or use the arrow keys.

  • 1. Ensure you have the correct parts to reassemble. The dial (1), the spring (2) and the collar (3).
  • 2. Place the spring on to the dial shaft.
    Make sure to fit the smaller end on first.
  • 3. Push the spring as far into the back of the dial as possible.
  • 4. Align the collar with the dial.
    There may be a notch in both the collar and dial shaft to align.
  • 5. Push the collar and dial together to assemble the pieces.
  • 6. Align the dial assembly with the oven control pin cutaway.
  • 7. Firmly push the dial onto the oven control pin.