Click each step to see the action. You can also click the picture or use the arrow keys.

  • Always make sure that you unplug the tumble dryer from the mains before you start any maintenance.

    Warning: Do not use Abrasive cleaners, sharp instruments, soap, household cleaner, detergent or flammable fluids. They may damage the tumble dryer and may cause a fire.

    CAUTION: The condenser MUST in place and be cleaned after each use.

  • 1. Clean the condenser when the condenser cleaning warning indicator illuminates, or after 30 drying cycles or once a month.
  • 2. Wait for the tumble dryer to cool down before cleaning the condenser.
  • 3.

    Unplug the tumble dryer from the mains power.

  • 4. Locate the plinth cover.
  • 5.

    Using the plinth opening slot open the plinth cover.

  • 6. Release the 2 cover locks which hold the condenser in place.
  • 7. Pull the condenser out.
  • 8.

    Using running water, clean the condenser. Then allow the condenser time to drain off.

  • 9.

    Replace the condenser.

  • 10.

    Lock back into place the 2 cover locks.

  • 11.

    Close the plinth cover.

  • 12.

    Plug the tumble dryer back into the mains power.