Click each step to see the action. You can also click the picture or use the arrow keys.

  • 1. Always leave a few minutes after a cycle has finished before trying to open the door. This is because the child lock may be on.
  • 2. Turn the programme selection knob to Off.
  • 3. If there is any water left in the washer dryer, turn the programme selection knob to spin to drain out any water.
  • 4. If the spin cycle is not finishing, check the pump filter for any blockages.
    For more information, see the Clean the pump filter topic.
  • 5. Check the waste pipe for any blockages
    For more information, see the Disconnect Drainage – Spigot fitting or Disconnect Drainage — Standpipe fitting topics.
  • 6. If the door is still not opening, disconnect the washer dryer from the mains socket.