Click each step to see the action. You can also click the picture or use the arrow keys.

  • 1.

    A Hose Support Crook is used to suspend the waste pipe on a wall at the required height. Attach this to your waste pipe before fixing it to the wall.

  • 2.

    Elevate the waste pipe to a height of between 65cm and 100cm, this allows the waste water to drain away and stop water being let back into the machine.

  • 3.

    Check there are no plug or blanking caps covering the end of the waste pipe or spigot connection.

  • 4.

    Connect the waste pipe by pushing it firmly on to the waste pipe spigot.

  • 5.

    If required, you can secure a waste pipe to the drain connection using an appropriate sized jubilee clip.