Simulator • Washer Dryer

Checking Waste — Leaks

1.

Check Filter pump is securely in place. Open the cover and turn firmly clock-wise to close fully.

2. Inspect the waste pipe for damage.

3. Inspect the waste pipe connection to the washer dryer for leaks.

If you discover a leak on the waste connection from the washer dryer, please call technical support.

4.

Spigot connection – ensure the spigot hose is pushed firmly over the end of the waste connection.

5.

Ensure blanking caps are covering any unused drain connections.

6.

Standpipe connection – ensure the waste pipe from the washer dryer is pushed at least 300mm into the standpipe.

7.

Ensure the waste pipe is not pushed all the way to the bottom of the standpipe.