Clean the pump filter
1.
Warning: The filter should never be removed during a wash programme, always wait until the wash programme has finished and the laundry has been taken out.
2.
Turn the mains water connection to the OFF position to prevent water entering the washing machine.
3.
Locate the pump cover, which is usually at the bottom left or right on the front of the washing machine.
4.
Place a container or a towel in front of the pump cover, this will prevent any spillage from the remaining water in the washing machine.
5.
Open or remove the pump cover.
Note: Your washing machine may have a waste pipe, pull the waste pipe out. Remove or open the cap on the end, then empty any trapped water before opening the pump filter.
6.
Turn the pump filter anti-clockwise.
7.
Remove the pump filter from its housing.
8.
Remove any dirt and blockages, then clean the pump filter with clean water.
9.
Place the pump filter back into its housing, then turn the pump filter clock-wise to lock it into place.
Note: if your washing machine has a waste pipe, replace or close the cap and place the waste pipe back into the housing.
10.
Close or replace the pump cover.
11.
Open the inlet water tap.
12.
It is recommended that the pump filter is cleaned every 2-3 months.